|
SRC BASECOAT
SECTION 1 - PRODUCT
INFORMATION
|
Product Identifier:
SRC Basecoat |
|
|
Product Use:
Protective Coating |
SECTION 2 - HAZARDOUS INGREDIENTS
|
Hazardous Ingredients (Specific) |
% |
CAS
Number |
LD
50 of
Ingredient (Specify species, route) |
LC
50 of
Ingredient
(Specify species) |
|
XYLENE (MIXED ISOMERS) |
55 |
1330-20-7 |
4300 mg/kg(Oral, RAT) |
5000 ppm(Vapor, RAT) |
SECTION 3 - PHYSICAL DATA
Physical State:
Liquid |
Odour and Appearance:
Liquid (colours vary) with a strong solvent smell |
Odour Threshold(ppm):
Not Available |
Specific Gravity:
1.08 |
Vapor Density(air=1):
Not Available |
Vapor Pressure(mmHg):
Not Available |
Evaporation Rate:
Not Available |
Boiling Point (º
C ) :
Not Available |
Freezing Point(º
C ):
Not Available |
pH:
Not Applicable |
Coefficient of Water/Oil Distribution:
Not Available |
SECTION 4 - FIRE AND EXPLOSION DATA
|
Flammability:
Yes |
If yes, Under which Conditions?
flammable liquid |
|
Means of Extinction:
Alcohol foam, Carbon dioxide, Dry
chemical powder, Polymer foam, water. |
Flashpoint and Method:
7 °C Closed Cup |
Upper Flammable Lt (% by Volume):
Not Available |
Lower Flammable Lt (% by Volume):
Not Available |
Autoignition Temperature:
Not Available |
Explosion Data - Sensitivity to Impact:
No |
Explosion Data - Sensitivity to Static discharges:
No |
|
Hazardous Combustion Pdts:
sulfur dioxide, nitrogen oxides, carbon monoxide,
calcium oxide, carbon dioxide, sulfur oxides, carbon monxide,
magnesium oxide, hydrogen chloride, phosgene, chlorine, chlorine
dioxide. |
SECTION 5 - REACTIVITY DATA
|
Chemical Stability:
Stable |
If Yes, Under which Conditions?
Not Applicable |
|
Incompatibility with other substances:
Yes |
If yes, which ones?
Strong Acids, Strong Oxidizing
agents, Strong Bases |
|
Reactivity, and under what conditions?
heat, sparks, open flame, generation of dust,
ignition sources |
|
Hazardous Decomposition Products:
sulfur dioxide, carbon monoxide, nitrogen oxides,
carbon dioxide, phosgene, hydorgen chloride, hydrogen chloride,
chlorine |
SECTION 6 -
TOXICOLOGICAL PROPERTIES
| Route
of Entry |
Skin Contact: Yes |
Absorption: Yes |
Eye Contact: Yes |
Inhalation: Yes |
Ingestion: Yes |
Effects to Acute exposure to Product:
XYLENE (MIXED ISOMERS) has been known to cause
HEADACHE, FATIGUE, IRRITABILITY, LASSITUDE, NAUSEA, ANOREXIA,
FLATULENCE, IRRITATION OF THE EYES, NOSE, AND THROAT, MOTOR
INCOORDINATION and IMPAIRMENT OF EQUILIBRIUM. |
Effects to Chronic exposure to Product:
XYLENE (MIXED ISOMERS) has been known to cause
CONJUNCTIVITIS, DRYNESS OF THE NOSE, THROAT, AND SKIN, DERMATITIS,
KIDNEY AND LIVER DAMAGE. |
Exposure Limits (Value,Units,By)
XYLENE (MIXED ISOMERS): 100 PPM ACGIH |
Irritancy
(if yes, explain)
XYLENE (MIXED ISOMERS) is a skin and eye irritant. |
|
Sensitization (if yes, explain) |
Carcinogenicity (if yes, explain) |
|
Reproductive Toxicity (if yes,
explain) |
Teratogenicity (if yes, explain)
XYLENE (MIXED ISOMERS) may cause birth defects. (Xylene has
teratogenic effects on some animals) |
|
Mutagenicity (if yes, explain) |
Synergistic Products (if yes, explain) |
SECTION 7 - PREVENTIVE MEASURES
|
Personal Protective Equipment |
Gloves: Yes |
Respirator: Yes |
Eye: Yes |
Footwear: No |
Clothing: No |
Other: No |
|
If checked, specify type:
Gloves: BUTYL RUBBER Respirator: NIOSH
APPROVED Eye: SPLASH RESISTANT |
|
Engineering controls (specify such as ventilation, enclosed
process): Use
mechanical ventilation to reduce exposure, ground all equipment
and avoid exposure to open flames or sparks |
|
Leak and Spill Procedure:
Wear adequate protective equipment and
eliminate all ignition sources. Contain spill with absorbent
material and place in a suitable covered and labeled container for
disposal |
|
Waste Disposal:
Check with Federal, Provincial and local government regulations
and requirements prior to disposal |
|
Handling Procedures Equipment:
Use in a well ventilated area. Do not
use with incompatible substances and keep away from heat and all
ignition sources. Use grounded and and non-sparking equipment
only. |
|
Storage Requirements:
Store in a cool, well ventilated area
out of direct sunlight. Store away from heat and all ignition
sources. Storage facility should be manufactured out of fire
resistant materials. |
|
Special Shipping Information:
TDG Shipping Name: PAINT
Classification: 3.2 Packing Group: II Identification Number:
UN1263 |
SECTION 8 - FIRST AID MEASURES
| Inhalation:
Remove to fresh air. Get medical help if there is any breathing
difficulty |
| Ingestion:
Do not induce vomiting unless directed by a physician. If
conscious and alert, give two glasses of water. Seek medical
attention immediately |
| Skin
Contact: Remove
Contaminated clothing (including shoes) and wash before reuse.
Flush with large amounts of soap and water. If irritation
persists, seek medical attention. |
| Eye Contact:
Flush eyes with large amounts of lukewarm water for 20 minutes,
while holding eyelids open or until irritation subsides. If
irritation persist, get medical attention. |
|
SRC TOPCOAT
SECTION 1 - PRODUCT INFORMATION
|
Product Identifier:
SRC Topcoat - Grey |
|
|
Product Use:
Protective Coating |
SECTION 2 - HAZARDOUS INGREDIENTS
|
Hazardous Ingredients(Specific) |
% |
CAS
Number |
LD
50 of
Ingredient
(Specify species, route) |
LC
50 of
Ingredient (Specify species) |
|
ZINC OXIDE |
3.12 |
1314-13-2 |
7950 mg/kg (Oral, MOUTH) |
Not Available |
| SILICA,
CRYSTALLINE, QUARTZ |
13 |
14808-60-7 |
Not Available |
Not Available |
SECTION 3 - PHYSICAL DATA
Physical State:
Liquid |
Odour and Appearance:
liquid with a slight ammonia smell |
Odour Threshold(ppm):
Not Available |
Specific Gravity:
1.27 |
Vapor Density(air=1):
Not Available |
Vapor Pressure(mmHg):
Not Available |
Evaporation Rate:
Not Available |
Boiling
Point(º
C ):
Greater than 100°C |
Freezing
Point(º
C ):
Less than 0°C |
pH:
8.5-9.5 |
Coefficient of Water/Oil Distribution:
Not Available |
SECTION 4 - FIRE AND EXPLOSION DATA
|
Flammability:
No |
If yes, Under which Conditions?
Not Applicable |
|
Means of Extinction:
Alcohol foam, Carbon dioxide, Dry
chemical powder, Polymer foam |
Flashpoint and Method:
Not Applicable |
Upper Flammable Lt (% by Volume):Not
Applicable |
Lower Flammable Lt (% by Volume):Not
Applicable |
Autoignition Temperature:
Not Applicable |
Explosion Data - Sensitivity to Impact:
No |
Explosion Data - Sensitivity to Static discharges:
No |
|
Hazardous Combustion Pdts:
carbon monoxide, carbon dioxide, calcium oxide,
ammonia, nitrogen oxides, magnesium oxide |
SECTION 5 - REACTIVITY DATA
|
Chemical Stability:
Stable |
If Yes, Under which Conditions?
Not Applicable |
|
Incompatibility with other substances:
Yes |
If yes, which ones?
Strong Acids Strong Oxidizing agents
Strong Bases |
|
Reactivity, and under what conditions? |
| Hazardous
Decomposition Products: carbon monoxide,
carbon dioxide, aldehydes |
SECTION 6 - TOXICOLOGICAL PROPERTIES
| Route
of Entry |
Skin Contact: Yes |
Absorption:
Yes |
Eye Contact: Yes |
Inhalation: Yes |
Ingestion: Yes |
Effects to Acute exposure to Product:
ZINC OXIDE has been known to cause METAL FUME FEVER
(FLU LIKE SYMPTOMS; SWEATING,
SHIVERING HEADACHE, FEVER, NAUSEA, VOMITING and AND TIREDNESS). |
Effects to Chronic exposure to Product:
SILICA, CRYSTALLINE, QUARTZ has been known to cause
PROLONGED OR REPEATED EXPOSURE OF CRYSTALLINE SILICA DUST MAY
CAUSE SILICOSIS. |
Exposure Limits (Value,Units,By)
ZINC OXIDE: 10 mg/m3 ACGIH
SILICA, CRYSTALLINE, QUARTZ: 0.1 mg/m3 ACGIH |
Irritancy
(if yes, explain)
ZINC OXIDE is a skin and eye irritant. SILICA, CRYSTALLINE, QUARTZ
is a skin and eye irritant. |
|
Sensitization (if yes, explain) |
Carcinogenicity (if yes, explain)
SILICA, CRYSTALLINE, QUARTZ
is considered to be a suspected human carcinogen(A2) by ACGHI.
SILICA, CRYSTALLINE, QUARTZ is carcinogenic to humans(1) by IARC. |
|
Reproductive Toxicity (if yes,
explain) |
Teratogenicity (if yes, explain) |
|
Mutagenicity (if yes, explain) |
Synergistic Products (if yes, explain) |
SECTION 7 - PREVENTIVE MEASURES
|
Personal Protective Equipment |
Gloves: No |
Respirator: Yes |
Eye: No |
Footwear: No |
Clothing: No |
Other: No |
|
If checked, specify type:
Respirator: DUST MASK, WHEN SANDING |
Engineering controls (specify such as ventilation, enclosed
process):
Use mechanical ventilation to reduce exposure, ground all
equipment and avoid exposure to open flames or sparks |
|
Leak and Spill Procedure:
Wear adequate protective equipment and
eliminate all ignition sources. Contain spill with absorbent
material and place in a suitable covered and labeled container for
disposal |
|
Waste Disposal:
Check with Federal, Provincial and local government regulations
and requirements for disposal |
|
Handling Procedures Equipment:
Use in a well ventilated area. Do not
use with incompatible substances and keep away from heat and all
ignition sources. Use grounded and non-sparking equipment only. |
Storage Requirements:
Store in a cool, well ventilated area out of direct sunlight.
Store away from heat and all ignition sources. Storage facility
should be manufactured out of fire resistant materials. |
|
Special Shipping Information:
None Required |
SECTION 8 - FIRST AID MEASURES
| Inhalation:
Remove to fresh air. Get medical help if there is any breathing
difficulty |
| Ingestion:
Do not induce vomiting unless directed by a physician. If
conscious and alert, give two glasses of water. Seek medical
attention immediately |
| Skin
Contact: Remove
Contaminated clothing (including shoes) and wash before reuse.
Flush with large amounts of soap and water. If irritation
persists, seek medical attention. |
| Eye Contact:
Flush eyes with large amounts of lukewarm water for 20 minutes,
while holding eyelids open or until irritation subsides. If
irritation persist, get medical attention. |
|
Contact us now to learn more or to purchase.
Copyright All
Rights Reserved
|
